Anritsu Site Master S331D User Manual download pdf

Site Master

™

S331D/S332D

Specifications

MS2712

SiteMaster

SpectrumMaster

CellMaster

S331D

Site Master

SiteMaster

MS2712

MS2711D

Spectrum Master

SpectrumMaster

MS2712

MT8212A

Cell Master

CellMaster

Ordering Information

Connection Configurations:

Terminate (75, 120Ω)

Bridge (≥1000Ω)

Monitor (Connect via 20 dB pad in DSX)

Receiver Sensitivity: 0 to –43 dB

Clock Sources: External

Internal 2.048 MHz ±30 ppm

Pulse Shapes: Conform to ITU G.703

Pattern Generation and Detection:

PRBS: 2-9, 2-11, 2-15, 2-20, 2-23 Inverted and

non-inverted, QRSS, 1-in-8 (1-in-7), 2-in-8, 3-in-24,

All ones, All zeros, T1-Daly, User defined (≤32 bits)

Circuit Status Reports: Carrier present, Frame ID

and Sync., Pattern ID and Sync.

Alarm Detection: AIS, RAI, MMF

Error Detection: Frame Bits, Bit, BER, BPV, CRC, E-Bits,

Error Sec

Error Insertion: Bit, BPV, Framing Bits, RAI, AIS

Loopback Modes: Self loopback

Level Measurements: Vp-p (±5%)

Data Log: Continuous, up to 48 hrs

General

Language Support: Chinese, English, French, German,

Japanese, Spanish,

Internal Trace Memory: 200 traces

Setup Configuration: S332D - 20, S331D - 25

Display: VGA monochrome or VGA color LCD (Option 3)

with adjustable backlight

Inputs and Outputs Ports:

RF Out: Type N, female, 50Ω

Maximum Input without Damage: +23 dBm, ± 50 VDC

RF In: Type N, female, 50Ω

Maximum Input without Damage: +43 dBm (Peak), ± 50 VDC

Ext. Trig In: BNC, female (5 V TTL) (S332D Models only)

Ext. Freq Ref In (2 to 20 MHz): Shared BNC, female,

50Ω, (–15 dBm to +10 dBm) (S332D Models only)

T1/E1 (Receive & Transmit): Bantam Jack

(S331D Models with Option 50 only)

Serial Interface: RS-232 9 pin D-sub, three wire serial

Electromagnetic Compatibility: Meets European

Community requirements for CE marking

Safety: Conforms to EN 61010-1 for Class 1

portable equipment

Temperature:

Operating: –10°C to 55°C, humidity 85% or less

Non-operating: –51°C to +71°C (recommended

battery to store separately between 0°C to +40°C

for any prolonged non-operating storage period)

Environmental: MIL-PRF-28800F Class 2

Power Supply:

External DC Input: +12.5 to +15 volt dc, 1350 mA max

Internal: NiMH battery: 10.8 volts, 1800 mAH

Dimensions:

Size (w x h x d): 25.4 cm x 17.8 cm x 6.1 cm

(10.0 in x 7.0 in x 2.4 in)

Weight: <2.28 kg (<5 lbs) includes battery

Measurement Range: +20 dBm to –135 dBm

Input Attenuator Range: 0 to 51 dB,

selected manually or automatically coupled to

the reference level. Resolution in 1 dB steps.

Displayed Average Noise Level:

≤–135 dBm typical, ≥10 MHz (preamp on)

≤–115 dBm typical, <10 MHz (preamp on)

for input terminated , 0 dB attenuation,

RMS detection, 100 Hz RBW

Dynamic Range: >65 dB

Display Range: 1 to 15 dB/division, in 1 dB

steps, 10 divisions displayed

Scale Units: dBm, dBV, dBmV, dBuV, V, W

RF Input VSWR: 1.5:1 typical, (≥20 dB atten.,

(10 MHz to 2.4 GHz)

Power Meter (Option 29)

Frequency Range: 3 MHz to 3.0 GHz

Measurement Range: –80 dBm to +20 dBm

Display Range: –80 dBm to +80 dBm

Offset Range: 0 to +60 dB

Accuracy: ±1 dB typical (±1.5 dBm max), >2 GHz to 3 GHz

±0.5 dB typical (±1 dB max), ≥10 MHz to 2 GHz

±2 dB, 3 MHz to <10 MHz

VSWR: 1.5:1 typical (Pin> -30 dBm, 10 MHz to 2.4 GHz)

Maximum Power: +20 dBm (0.1W) without external

attenuator

T1 Analyzer (Option 50 on

S331D Models only)

Line Coding: AMI, B8ZS

Framing Modes: D4 (Superframe), ESF

(Extended Superframe)

Connection Configurations:

Terminate (100Ω)

Bridge (≥1000Ω)

Monitor (Connect via 20 dB pad in DSX)

Receiver Sensitivity: 0 to –36 dBdsx

Transmit Level: 0 dB, –7.5 dB, and -15 dB

Clock Sources: External

Internal: 1.544 MHz ± 30 ppm

Pulse Shapes: Conform to ANSI T1.403

Pattern Generation and Detection: PRBS: 2-9, 2-11,

2-15, 2-20, 2-23 Inverted and non-inverted,

QRSS, 1-in-8 (1-in-7), 2-in-8, 3-in-24, All ones,

All zeros, T1-Daly, User defined (≤ 32 bits)

Circuit Status Reports: Carrier present, Frame ID

and Sync., Pattern ID and Sync.

Alarm Detection: AIS (Blue Alarm), RAI

(Yellow Alarm)

Error Detection: Frame Bits, Bit, BER, BPV, CRC,

Error Sec

Error Insertion: Bit, BPV, Framing Bits, RAI, AIS

Loopback Modes: Self loop, CSU, NIU, User

defined, In-band or Data Link

Level Measurements: Vp-p (± 5%)

Data Log: Continuous, up to 48 hrs

E1 Analyzer (Option 50 on

S331D Models only)

Line Coding: AMI, HDB3

Framing Modes: PCM30, PCM30CRC, PCM31,

PCM31CRC

All specifications apply when the unit is

calibrated at ambient temperature after a five

minute warm up. Typical values are given for

reference, and are not guaranteed.

Cable and Antenna Analyzer

Frequency Range: 25 MHz to 4.0 GHz

Frequency Accuracy: ≤ ±75 ppm @ +25˚C

Frequency Resolution: 100 kHz

Output Power: <0 dBm (–10 dBm nominal)

Immunity to Interfering Signals:

on-channel +17 dBm

on-frequency –5 dBm

Measurement speed: ≤3.5 msec / data point (CW ON)

Number of data points: 130, 259, 517

Return Loss: Range: 0.00 to 60.00 dB

Resolution: 0.01 dB

VSWR: Range: 1.00 to 65.00

Resolution: 0.01

Cable Loss: Range: 0.00 to 30.00 dB

Resolution: 0.01 dB

Measurement Accuracy: >42 dB corrected directivity

after calibration

Distance-To-Fault

Vertical Range: Return Loss: 0.00 to 60.00 dB

VSWR: 1.00 to 65.00

Horizontal Range: Range: 0 to (# of data pts –1) x

Resolution to a maximum of 1197 m (3929 ft),

# of data pts = 130, 259, 517

Horizontal Resolution (Rectangular windowing):

Resolution (meter) = (1.5 x 10^8) x (Vp)/DF

Where Vp is the cable's relative propagation

velocity and where DF is the stop frequency minus

the start frequency (in Hz)

Spectrum Analyzer (S332D Models)

Frequency:

Frequency Range: 100 kHz to 3.0 GHz

Measurement Range: +20 dBm to –135 dBm

Frequency Reference (Internal Timebase):

Aging: ±1 ppm/yr

Accuracy: ±2 ppm

Frequency Span: 10 Hz to 2.99 GHz in 1, 2, 5

step selections in auto mode, plus zero span

Sweep Time: ≤1.1 sec full span;

≤ 50 µsec to 20 sec selectable in zero span

Resolution Bandwidth (–3 dB):

100 Hz to 1 MHz in 1-3 sequence ± 5% Accuracy

Video Bandwidth (–3 dB):

3 Hz to 1 MHz in 1-3 sequence ± 5% Accuracy

SSB Phase Noise (1 GHz) @ 30 kHz Offset:

≤–75 dBc/Hz

Spurious Responses: ≤–45 dBc

Spurious Residual Responses: ≤–90dBm, >10 MHz

≤–80 dBm, ≤10 MHz (10 kHz RBW, pre-amp on)

Amplitude:

Total Level Accuracy:

±1 dB typical (±1.5 dBm max), >2 GHz to 3 GHz

±0.5 dB typical (±1 dB max), ≥10 MHz to 2 GHz

±2 dB, ≥ 500 kHz to <10 MHz

±3 dB typical, <500 kHz

for input signal levels ≥ –60 dBm,

excludes input VSWR mismatch

Discover What’s Possible

©Anritsu October 2003. All trademarks are registered trademarks of

their respective companies. Data is subject to change without notice.

PN: 11410-00321, Rev. A

Site Master

™

S331D/S332D

SiteMaster

The World’s Leading Cable and Antenna System Analyzer

SALES CENTERS:

United States (800) ANRITSU Europe 44 (0) 1582-433433 Microwave Measurements Division

Canada (800) ANRITSU Japan 81 (46) 223-1111 490 Jarvis Drive, Morgan Hill, CA 95037-2809

South America 55 (21) 2527-6922 Asia-Pacific (65) 6282-2400 http://www.us.anritsu.com

Basic Models

S331D Cable and Antenna Analyzer (25 MHz to 4.0 GHz)

with built-in DTF

S332D Cable and Antenna Analyzer (25 MHz to 4.0 GHz),

with built-in DTF, Spectrum Analyzer (100 kHz to 3.0 GHz)

Standard Accessories Include

User's Guide

Soft Carrying Case

AC-DC Adapter with Power Cord

Automotive Cigarette Lighter/12 Volt DC Adapter

One Year Warranty

Handheld Software Tools CDROM containing Fault Location (DTF)

and Smith Chart

Serial Interface Cable

Rechargeable Battery, NiMH

Options

Option 3 Color LCD Display

Option 29 Power Meter (does not require external detector)

Option 50 T1/E1 Analyzer (S331D only)

Optional Accessories

1N50C Limiter, N(m) to N(f), 50Ω, 10 MHz to 18 GHz

42N50-20 Attenuator, 20 dB, 5 watt, DC to 18 GHz, N(m)-N(f)

42N50A-30 Attenuator, 30 dB, 50 watt, DC to 18 GHz, N(m)-N(f)

ICN50 InstaCal

™

Calibration Module, 2 MHz to 4.0 GHz, N(m), 50Ω

22N50 Open/Short, DC to 18 GHz, N(m), 50Ω

22NF50 Open/Short, DC to 18 GHz, N(f), 50Ω

SM/PL Precision Load, DC to 4 GHz, 42 dB, N(m), 50Ω

SM/PLNF Precision Load, DC to 4 GHz, 42 dB, N(f), 50Ω

OSLN50LF Precision Open/Short/Load, DC to 4 GHz, 42 dB, 50Ω, N(m)

OSLNF50LF Precision Open/Short/Load, DC to 4 GHz, 42 dB, 50Ω, N(f)

2000-767 Precision Open/Short/Load, DC to 4 GHz, 7/16 DIN(m), 50Ω

2000-768 Precision Open/Short/Load, DC to 4 GHz, 7/16 DIN(f), 50Ω

15NN50-1.5C Test Port Cable Armored, 1.5 meters, N(m)-N(m), 6 GHz, 50Ω

15NN50-3.0C Test Port Cable Armored, 3.0 meters, N(m)-N(m), 6 GHz, 50Ω

15NN50-5.0C Test Port Cable Armored, 5.0 meters, N(m)-N(m), 6 GHz, 50Ω

15NNF50-1.5C Test Port Cable Armored, 1.5 meters, N(m)-N(f), 6 GHz, 50Ω

15NNF50-3.0C Test Port Cable Armored, 3.0 meters, N(m)-N(f), 6 GHz, 50Ω

15NNF50-5.0C Test Port Cable Armored, 5.0 meters, N(m)-N(f), 6 GHz, 50Ω

15ND50-1.5C Test Port Cable Armored, 1.5 meters, N(m)-7/16 DIN(m),

6 GHz, 50Ω

15NDF50-1.5C Test Port Cable Armored, 1.5 meters, N(m)-7/16 DIN(f),

6 GHz, 50Ω

34NN50A Precision Adapter, N(m)-N(m), DC to 18 GHz, 50Ω

34NFNF50 Precision Adapter, N(f)-N(f), DC to 18 GHz, 50Ω

1091-26 Adapter, N(m)-SMA(m), DC to 18 GHz, 50Ω

1091-27 Adapter, N(m)-SMA(f), DC to 18 GHz, 50Ω

1091-80 Adapter, N(f)-SMA(m), DC to 18 GHz, 50Ω

1091-81 Adapter, N(f)-SMA(f), DC to 18 GHz, 50Ω

1091-172 Adapter, N(m)-BNC(f), DC to 1.3 GHz, 50Ω

510-90 Adapter, 7/16 DIN(f)-N(m), DC to 7.5 GHz, 50Ω

510-91 Adapter, 7/16 DIN(f)-N(f), DC to 7.5 GHz, 50Ω

510-92 Adapter, 7/16 DIN(m)-N(m), DC to 7.5 GHz, 50Ω

510-93 Adapter, 7/16 DIN(m)-N(f), DC to 7.5 GHz, 50Ω

510-96 Adapter, 7/16 DIN(m)-7/16 DIN(m), DC to 7.5 GHz, 50Ω

510-97 Adapter, 7/16 DIN(f)-7/16 DIN(f), DC to 7.5 GHz, 50Ω

2000-1030 Portable Antenna, SMA (m), 1.71 to 1.88 GHz, 50Ω

2000-1031 Portable Antenna, SMA (m), 1.85 to 1.99 GHz, 50Ω

2000-1032 Portable Antenna, SMA (m), 2.4 to 2.5 GHz, 50Ω

2000-1200 Portable Antenna, SMA (m), 806-869 MHz, 50Ω

2000-1035 Portable Antenna, SMA (m), 896-941 MHz, 50Ω

1030-86 Band Pass Filter, 806-869 MHz, 1.7 dB loss, N(m) to SMA(f), 50Ω

1030-87 Band Pass Filter, 902-960 MHz, 1.7 dB loss, N(m) to SMA(f), 50Ω

1030-88 Band Pass Filter, 1.85-1.99 GHz, 1.8 dB loss, N(m) to SMA(f), 50Ω

1030-89 Band Pass Filter, 2.4-2.5 GHz, 1.4 dB loss, N(m) to SMA(f), 50Ω

806-16 Bantam Plug to Bantam Plug

806-116 Bantam Plug to BNC

806-117 Bantam "Y" Plug to RJ48

551-1691 USB to RS232 adapter cable

48258 Soft Carrying Case

760-229 Transit Case

633-27 Rechargeable Battery, NiMH

2000-1029 Battery Charger, NiMH, w/ Universal Power Supply

40-163 AC/DC Adapter

806-62 Automotive Cigarette Lighter/12 Volts DC Adapter

800-441 Serial Interface Cable

2300-347 Software Tools

10580-00079 Site Master S331D/S332D User's Guide

10580-00100 Site Master S331D/S332D Programming Manual

10580-00101 Site Master S331D Maintenance Manual

10580-00102 Site Master S332D Maintenance Manual

Printers

2000-1214 HP DeskJet Printer, Model 450: Includes printer cable, 2000-1216

black print cartridge and U.S. power cord. Also includes 2000-753

serial-to-parallel Centronics converter cable and 1091-310

Centronics-to DB25 adapter. Rechargeable battery is optional and

is not included.

2000-753 Null Modem Serial-to-Parallel Centronics Converter Cable

1091-310 Adapter 36-pin Centronics female-to-DB25 female

2000-1216 Black Print Cartridge

2000-663 Power Cable (Europe) for DeskJet Printer

2000-664 Power Cable (Australia) for DeskJet Printer

2000-667 Power Cable (S. Africa) for DeskJet Printer

2000-1217 Rechargeable Battery for DeskJet Printer, Model 450

2000-1218 Power Cable (U.K.) for DeskJet Printer

Cable and Antenna Analyzer

25 MHz to 4000 MHz

1 2 3 4 5 6

Summary of Contents

Page 1 - Site Master

Site Master™S331D/S332DSpecificationsMS2712SiteMasterSpectrumMasterCellMasterS331D Site MasterSiteMasterMS2712MS2711D Spectrum MasterSpectrumMasterMS2

Page 2 - Test / Capability Benefits

Site Master is the preferred cable and antenna analyzer of wireless providers, contractors and installers.Cable and Antenna AnalyzerThe cable and ante

Page 3

Site Master is the preferred cable and antenna analyzer of wireless providers, contractors and installers.Cable and Antenna AnalyzerThe cable and ante

Page 4

Site Master is the preferred cable and antenna analyzer of wireless providers, contractors and installers.Cable and Antenna AnalyzerThe cable and ante

Page 5

Site Master™S331D/S332DSpecificationsMS2712SiteMasterSpectrumMasterCellMasterS331D Site MasterSiteMasterMS2712MS2711D Spectrum MasterSpectrumMasterMS2

Page 6

Site Master™S331D/S332DSpecificationsMS2712SiteMasterSpectrumMasterCellMasterS331D Site MasterSiteMasterMS2712MS2711D Spectrum MasterSpectrumMasterMS2