Anritsu MG3700A MG3700A Specifications Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
6 Product Brochure
l
MX3701xxA
W-CDMA IQproducer
W-CDMA IQproducer is GUI-based, PC application software for
generating waveform patterns used in W-CDMA Rx sensitivity
measurement. Once created, the waveform pattern file is
downloaded to the MG3700A hard drive.
Using the MG3700A, Vector Signal Generator functionality, the files
are loaded, selected, and output as a modulated RF signal.
By changing the Scrambling Code Number and Channelization
Code Number, waveform patterns can be created that support the
evaluation of W-CDMA terminals.
If complete control of all W-CDMA parameters is required, the
MX370101A HSDPA/HSUPA IQproducer software (sold separately)
can be used. For details, see the MX370101A HSDPA/HSUPA
IQproducer section of this document.
Downlink Settings
Downlink sets parameters including Scrambling code,
CPICH/P-CCPCH/PICH/DPCH power, Channelization code,
DPCH_PhyCH TFCI and Timing Offset, and DPCH_TrCH Data
to create the waveform pattern. (For details, see the Downlink
Parameter Setting Range table described later.)
Additionally, the Downlink Easy Setup function supports the
Reference Measurement Channel (RMC) items specified by
3GPP TS25.101 and TS25.104. Parameter setting is easy just by
selecting the items to create the waveform pattern.
Easy Setup Items include:
RMC: RMC 12.2 kbps (RX test)
RMC 12.2 kbps (Performance test)
RMC 64 kbps (Performance test)
RMC 144 kbps (Performance test)
RMC 384 kbps (Performance test)
Uplink Settings
Uplink sets parameters including Scrambling code, UL-DPCCH/
UL-DPDCH power, DPCH_PhyCH TFCI and Timing Offset, and
DPCH_TrCH Data to create the waveform pattern. (For details, see
the Uplink Parameter Setting Range table described later.)
Standard accessory
Downlink Main screen
Uplink Main screen
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 103 104

Comments to this Manuals

No comments