DIGITAL LINK MEASURING INSTRUMENTS
176 For product ordering information, see pages 5 – 12
PORTABLE 2.5G/10G ANALYZER
MP1580A
For 2.5G/10G Jitter/Wander Measurements
The MP1580A is a unique and powerful solution for analyzing jitter
at the standard OC-48/192 or STM-16/64 bit rates. It can measure
jitter of 2.5G/10G electrical interfaces (clock signal) with a simple
operation. In addition, when used in combination with the MP1570A
SONET/SDH/PDH/ATM Analyzer, evaluation of jitter characteristics
in digital transmission lines, systems and devices, such as — jitter
tolerance, jitter transfer, jitter generation, etc., can be performed
easily.
Functions
•
Complies with the latest ITU-T O.172 and Bellcore GR-1377
standards
The MP1580A conforms to both the OC-192/STM-64 jitter measure-
ment standards and supports required jitter modulation amplitude of
4000 UIp-p and 80 MHz jitter bandwidth.
•
Supports 10 GHz wander measurement according to the latest
ITU-T G.813 standard (option)
The MP1580A can generate and measure various types of wander.
It can generate wander in the frequency range of 10 µHz to 10 Hz at
400,000 UIp-p max. In addition, MTIE/TDEV can be measured in
real-time using an external PC and optional application software
(MX150002A).
•
Single cabinet support for both 2.5G and 10G jitter/wander
measurements
Just one MP1580A is required for 2.5G and 10G jitter generation and
analysis. When combined with the MP1570A and MU150000A, jitter
can be added to SONET/SDH signals and measured.
•
Differences from existing instrument (MP1777A)
Anritsu launched the MP1777A 10 GHz Jitter Analyzer in February
of 1998, as a jitter measurement solution for OC-192/STM-64
(9953M). The new MP1580A Portable 2.5G/10G Jitter Analyzer is
providing more convenience in measurement without the need for
ancillary equipment (network analyzer, external E/O-O/E converter).
Anritsu has also developed a Wide Band O/E Converter
(MU150017A/B) for the MP1570A to support jitter measurement of
80 MHz at 9953.28 Mbit/s as required by ITU-T standard in conjunc-
tion with the MP1580A. Although it uses two cabinets, the compact
size makes the system ideal for R&D, manufacturing, installation and
maintenance. In addition, the MP1570A can be controlled from the
MP1580A for performing automatic measurements, such as Jitter
Tolerance and Jitter Transfer.
Application
•
Output jitter measurement
The MP1580A can easily measure the jitter clock signal (electrical in-
terface only) by just inputting the output clock of DUT directly.
Optical signals can be measured easily by combining the MP1580A
with the MP1570A, MU150000A, MU150001A and MU150017A/B.
•
Jitter tolerance measurement
When the MP1580A is used with the MP1570A (send/receive jittered
clock), jitter tolerance tests can be performed on OC-192/STM-64
and OC-48/STM-16 signals of electrical and optical interfaces.
Comments to this Manuals